Environmental Test

  • Thermal shock chamber
Thermal shock chamber

Thermal shock chamber

  • Model:EDT-3-80
  • 3 test zones
  • Temp.range:-40 ~ +80℃
  • Optional innser size
  • Product description:
  • INQUIRY

Model

EDT-3-80L

EDT-3-100L

EDT-3-150L

EDT-3-450L

Inner Size(cm)

50x40x40

50x50x40

60x50x50

80x75x75

Test method

Pneumatic operated door switch 3 chambers

Temperature range

-40 ~ +80℃

High temperature chamber pre-heating range

60 ~ 100℃

Heating speed

+60→+100℃ about 10 minutes

Low temperature chamber pre-cooling range

-65 ~ 0

Cooling speed

Ambient →-65℃ about 65 minutes

Temperature deviation

±3℃

Thermal recovery time

Within 5 minutes

External material

Antirust processing cold-rolled steel sheet

Internal material

SUS#304 stainless steel

Thermal insulation material

Polyurethane foam and fiberglass

Coolant

R404A / R23

Cooling method

Air cooling

Pressure

0.2 - 0.5Mpa

Power supply

Three phase, 380V, 50Hz


Thermal Shock Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.

The Thermal Shock Chamber is widely used in metal, plastic, rubber, electronics and other materials and Thermal Shock Chamber can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB…


****Related standards

About Film/Plastic Film Materials:

ASTM D882: Tensile Test

ASTM F1306: Puncture Test

ASTM D1938: Trouser Tear Test

ASTM D2732: Thermal Shrinkage Test

ASTM D1709, ISO 7765-1: Free-Falling Dart Method

ASTM D1894: Static and Kinetic Coefficients of Friction

ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test



About Plastic& Plastic Pipe MaterialsTest Standard

ISO 180: Izod Impact Test

ISO 9966: Ring Stiffness Test

ISO 179: Charpy Impact Test

ISO 4892: Weathering Aging Test

ASTM D3163: Plastic Lap-Shear Test

ISO 4422, ISO 3127: Pipe Impact Test

ASTM D4565, ISO 11357, EN 728: DSC/OIT

ISO 75: Heat Deflection Temperature (HDT)

ASTM D1598: Hydrostatic Pressure and Burst Test

ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)

ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test

ISO 306, ASTM D1525: Vicat Softening Temperature (VST)

ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test


About Rubber Materials Test Standard

ASTM D412, ISO 37-2005, JIS K6251,DIN 53504-2009: Tensile Strength & Elongation Test

ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test

ASTM D624-00, ISO 34-1: Tearing strength Test

ASTM D395-03, ISO 815-1: Compression Set Test

ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D

ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test

ISO 2781(Method A): Density Test

ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter

ASTM D1646: Mooney Viscometer












Scan the qr codeClose
the qr code