Rubber& Plastic Test

  • Melt Flow Index Tester
  • Melt Flow Index Tester
  • Melt Flow Index Tester
Melt Flow Index Tester Melt Flow Index Tester Melt Flow Index Tester

Melt Flow Index Tester

  • Model:EDP-012
  • Temperature range :RT--400°C
  • Testing range :MVR &MFR
  • Design standard :ASTM-D1238, ISO 1133
  • Product description:
  • INQUIRY

Testing range

0.1-800.00g/10min (MFR); 0.1-800.00 cm3/10min(MVR)

Temperature range

Room temperature-400°C

Controlling Accuracy

±0.2°C

Timing accuracy

0.1s

Displacement accuracy

0.01mm

Standard loads

325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g

Combination load

325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g

Material cutting method

Manual, timing and automatic cutting

Time setting

0.1~999.9min

Cylinder

Diameter 9.5504±0.0076mm

Land of piston

Diameter 9.4742±0.0076mm, length: 6.35±0.13mm

Thin hole pattern

External diameter: 9.5±0.02mm; Bore diameter 2.0955±0.0051mm;  length 8.00±0.025mm

Machine Size

(L×W×H) 40×51×60cm

Accessory

One set computer& software, one tool box, one piece operation video CD and one piece English manual

Design standard

ASTM-D1238, ISO 1133



Product description:

Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The automatic temperature control methods of the machine three kinds of blanking ways, manual, timing and automatic control according to operation method, which can realize melt-mass flow rate (MFR) and melt-volume flow rate (MVR) two test methods.

Application materials:
Melt Flow Index tester is used to determine the MFR value of melt flow rate in the viscous flow state of various polymers, it is applicable to the high melting temperature of polycarbonate, poly-aryl sulfone, fluorine plastic, nylon and other engineering plastics, also applicable to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, poly (POM), polycarbonate (PC) Resin, such as low melting temperature of plastic testing, widely used in plastic production, plastic products, petrochemical and other industries.



Related standards

About Film/Plastic Film Materials:

ASTM D882: Tensile Test

ASTM F1306: Puncture Test

ASTM D1938: Trouser Tear Test

ASTM D2732: Thermal Shrinkage Test

ASTM D1709, ISO 7765-1: Free-Falling Dart Method

ASTM D1894: Static and Kinetic Coefficients of Friction

ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test



About Plastic& Plastic Pipe MaterialsTest Standard

ISO 180: Izod Impact Test

ISO 9966: Ring Stiffness Test

ISO 179: Charpy Impact Test

ISO 4892: Weathering Aging Test

ASTM D3163: Plastic Lap-Shear Test

ISO 4422, ISO 3127: Pipe Impact Test

ASTM D4565, ISO 11357, EN 728: DSC/OIT

ISO 75: Heat Deflection Temperature (HDT)

ASTM D1598: Hydrostatic Pressure and Burst Test

ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)

ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test

ISO 306, ASTM D1525: Vicat Softening Temperature (VST)

ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test


About Rubber Materials Test Standard

ASTM D412, ISO 37-2005, JIS K6251,DIN 53504-2009: Tensile Strength & Elongation Test

ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1: Ozone Aging Test

ASTM D624-00, ISO 34-1: Tearing strength Test

ASTM D395-03, ISO 815-1: Compression Set Test

ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness Type A/D

ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low Temperature Test

ISO 2781(Method A): Density Test

ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter

ASTM D1646: Mooney Viscometer












Scan the qr codeClose
the qr code